profile
Door
More view more view
Recording the apparel supply chain
through shop-floor numbers and data

Process Analysis Is Cost Design: Six Steps Where AI Builds the CM

The full Monolis AI process analysis flow (2 min 1 sec, no sound) · use the fullscreen button to view it larger

AI Process Analysis series 1/6 · (1) Process analysis is cost design · (2) How to read an operation breakdown · (3) What Man Power 0.5 means · (4) Why the first week loses money · (5) When the lowest unit price is not the optimal factory · (6) How far to trust an AI draft

Key takeaways

In a garment’s FOB, the CM (cut and make) is decided by process analysis. Monolis has AI draft six steps first: reading the tech pack, the operation breakdown, line balancing, CM and delivery by factory, the basis for the final CM and the finished cost sheet. People focus on judgment, and each order makes the next draft more accurate.

Whenever a quote ran late, process analysis was usually the reason. You can’t get to a CM until someone has read the tech pack, broken down the operations and picked a factory. Monolis changes the order of that work. AI clears the bottleneck first, and people spend their time on judgment.

Where is the price of a garment decided?

When I worked at factories in Indonesia, the email I got most often was “How much can you do this style for?” One line of question, several days of answer. By the time someone had read a tech pack dozens of pages long, split it into operations and worked out which factory and which line to put it on, the reply was always a beat late.

Break down the price of a garment (FOB) and you can see why. Fabric and trims are priced by the market and the supplier. CM (cut and make) is different. It depends on how many operations there are, who does them, how many seconds each takes and which factory runs them. All of that comes out of process analysis.

That is why process analysis is cost design. How you write the operation breakdown is how you write the quote.

FOB of $13.31 broken into materials, CM, profit and others, and how the CM of $2.95 is set (example data)
Within FOB, CM is the part decided by process analysis (example data)

On the example screen, FOB is $13.31. Materials (A) are $9.29 (69.8%) and CM is $2.95 (22.2%). Materials take the larger share, but CM is the part factories and vendors can actually design and negotiate.

In Monolis, getting from one tech pack to a cost sheet takes six steps. At every step AI makes the draft, and people review and decide.

What AI does and what people do in each of six steps from tech pack to cost sheet
From one tech pack to a cost sheet: AI drafts each step, people decide

Step 1. AI reads the tech pack

Before

Someone flipped through the tech pack page by page and typed the style data into the system. Item, fabric, quantity, the 1st Delivery Cargo Date, all by hand. Typos and gaps crept in, and they only surfaced a few steps later.

What AI does

Upload the tech pack PDF and sketches, and AI reads the style data and fills in the fields. For the example order DR-2026-001, values like 3,000 pcs and a first delivery cargo date of 2026.08.11 land where they belong. It also looks at the front, back and detail sketches and tags parts and features such as neckline, sleeve, shirring and slit.

What changes

Data entry disappears and only checking is left. The person in charge just confirms the filled-in values match the tech pack.

Information from the tech pack moves into the Monolis fields automatically
Monolis screen detecting neckline, sleeve, shirring and slit in sketches and filling style attributes
AI finds parts and details in the sketches and fills in the style attributes

Step 2. AI drafts the operation breakdown

Before

An experienced IE specialist split the garment into operations one by one and assigned a machine and time to each. The same style could end up with a different number of operations and different times depending on who did it, and that difference went straight into the CM.

What AI does

One click on Generate with AI and the operation breakdown fills in line by line, with operations, machines and times. Rows that need a second look, such as an operation with no tool assigned, are flagged by AI first, with a one-line comment on what to do.

What changes

Nobody starts from a blank sheet anymore. The expert’s time goes into reviewing the draft and adjusting it for the floor, not into writing operations down. And because the same style always starts from the same draft, the CM depends less on who happened to work on it.

One click on Generate with AI and the operation breakdown fills in line by line
AI comment card flagging operations with no tool assigned after drafting the operation breakdown
Missing items flagged by AI before anyone asks

Step 3. AI balances the line

Before

Finding bottlenecks and moving operators around relied on spreadsheets and experience. Deciding which operation needs one more person and which two operations one person can cover could take half a day.

What AI does

Click Balance with AI and it reassigns operators across 48 operations. Operations over the Takt line get more people, and light operations are paired so one operator covers two. It sums up the bottleneck and the state of the line in a short paragraph. When someone changes the operators by hand, the result redraws right away.

What changes

You can see at a glance where to intervene. The final adjustment still comes from floor experience, but that experience gets to work from a much better starting point.

AI balances the line and sums up the result in a paragraph
Operators and balancing chart before and after AI line balancing
Before and after balancing: operations over the Takt line are resolved (example screen)

Step 4. AI calculates CM by factory and checks delivery

Before

“Which factory is the best fit for this style?” was worked out separately for each factory. It wasn’t unusual to win an order at a factory with a good price and only then find out its lines were already full.

What AI does

Select a factory and the target output, required operators and CM are calculated from that factory’s efficiency. On the example screen, Silver F3 comes out at $2.34 and Hanam F1 at $3.28. You can add candidate factories and compare them side by side.

It doesn’t stop there. AI places the order into that factory’s line schedule as a test and judges whether it can be finished before the delivery cargo date: OK, Needs Adjustment or Not Feasible. For the example order, Hanam F1 is OK and Silver F3 needs adjustment.

What changes

You select the factory with unit price and delivery on the same screen. The factory with the lowest unit price is not always the optimal one, and you can confirm that with numbers before taking the order.

Select a factory and its CM is calculated on the spot (example: Silver F3 $2.34)
AI places the order into the line schedule and judges delivery feasibility

Step 5. AI attaches the basis to the final CM

Before

The final CM survived as a single number. The reason behind it lived in someone’s spreadsheet and memory, and when a buyer asked “why this price?”, the files had to be dug up again.

What AI does

Next to the final CM, AI lays out how it was calculated: operations and times, factory efficiency and working days, all in one table. A learning curve chart shows the loss period while efficiency ramps up at the start of production and the point where that loss is recovered. For the example order the factory is Hanam F1. The calculated CM Price is $3.28, and a New Standard factor of 0.9 (-10%) brings the confirmed CM to $2.95. Each of those lines stays on the screen.

What changes

In front of buyers and factories, you can explain “why this price” in numbers. A price with its basis attached doesn’t give way as easily when someone pushes to cut it. The negotiation moves from gut feel to data.

Final CM with its calculation basis and learning curve chart (example data)
Final CM, its basis and the learning curve on one screen (example data)

Step 6. AI completes the cost sheet

Before

Once process analysis was done, the CM was handed over to the costing person, who copied it into the cost sheet and added up fabric, trims, packing and outsourcing separately. With the same numbers copied two or three times, versions drifted apart easily.

What AI does

The final CM goes straight into the pre-costing sheet (the cost sheet from here on). Combined with fabric, trims, packing, outsourcing and other costs, it calculates everything through to FOB. For the example order, that’s an FOB of $13.31 and an order amount of $39,930.00. The CM row in the cost sheet shows that the value came from process analysis.

What changes

When process analysis is finished, cost design is already finished too. Process analysis and costing stop being two jobs and become one flow. That is why Monolis calls this Cost design based Process Analysis.

The final CM of $2.95 flows into the pre-costing sheet
Full pre-costing sheet with the final CM applied (example data)
The completed pre-costing sheet: the CM row comes from process analysis (example data)

It gets more accurate the more you use it

Each order handled this way leaves something behind for the company: actual time per operation, difficulty by style, efficiency and labor results by factory, and the issues and fixes that came up during production.

The more of this builds up, the more accurate the next AI draft becomes, because a similar style is drafted with past orders as reference.

It also matters that evidence scattered across people’s memories and personal folders stays with the company. When the person in charge changes, the basis for every quote stays.

Cycle of new order, AI draft, production actuals and company data, and where accumulated data is used
The more orders you run, the sharper the AI draft

From writing operations to designing cost

What bothered me most on the factory floor was watching experienced IE specialists spend most of their day writing operations down. What they were really good at was the judgment call: “run this operation this way at this factory and it gets cheaper.”

AI is not a tool that writes the process analysis for you. It turns the person who used to write process analysis into the person who designs cost.

StepBeforeWith Monolis AI
Tech packRead and retyped by handAI reads it and fills the fields
Operation breakdownWritten from scratch by IEAI draft, gaps flagged
Line balancingOperators moved by spreadsheet and experienceAI assigns operators and sums up bottlenecks
CM by factoryCalculated factory by factory,
delivery checked after the order
CM and delivery check
on one screen
Final CMJust a numberBasis and learning curve kept with it
Cost sheetCM retyped and added upFinal CM flows in automatically

Next: How to Read an Operation Breakdown: Operations, SMV, Takt, Man Power

If you’d like to see Monolis AI process analysis in action, request a demo on the SIJE website.

back icon Back